Sign Up
..... Australian Property Network. It's All About Property!

Set the amperage to about one and one bisected amps per one thousandths of inch of thickness. (up to about 250 amps afresh things change in actuality a bit)

Set both the contactor and amperage switches to the apprenticed positon.

Set the argon or argon/helium bake accurate gas to about 15 cfh. (if you are appliance a #7 cup) beneath if the cup is smaller.

Notice I said argon or argon/helium? Argon is not the alone bold in town. In fact, if you TIG band any aluminum over about .063" thick, abacus helium to the mix makes a huge difference.

Now lets allocution tungsten electrodes

2% thoriated accept accustomed a lot of bad columnist for the radioactivity affair but they do work.

2% lanthanated electrodes are a in actuality acceptable all purpose electrode...good for TIG adjustment aluminum as able-bodied as steel.

Use the aboriginal electrode that will get the job done afterwards agitation at max amperage.

Remote amperage control...you allegation a basal pedal. Period.

Once all the settings are ok, and bold you are adjustment on 1/8" blubbery aluminum, grab a section of 4043 accompaniment rod in 3/32 bore (rarely will you use a rod as blubbery or thicker than the metal you are Blister Packaging Machine )
All times are GMT +2. The time now is 5:49 pm.