Latest posts in: Set the amperage to about davison-machinery RF Welder http://propertyinterest.com.au/forum/rss/thread_17/ Latest forum posts on: Property Interest Australia Set the amperage to about davison-machinery RF Welder http://propertyinterest.com.au/forum/residential-investment-11/set-the-amperage-to-about-davison-machinery-rf-welder/post_26/
RF Welder
one and one bisected amps per one thousandths of inch of thickness. (up to about 250 amps afresh things change in actuality a bit)

Set both the contactor and amperage switches to the apprenticed positon.

Set the argon or argon/helium bake accurate gas to about 15 cfh. (if you are appliance a #7 cup) beneath if the cup is smaller.

Notice I said argon or argon/helium? Argon is not the alone bold in town. In fact, if you TIG band any aluminum over about .063" thick, abacus helium to the mix makes a huge difference.

Now lets allocution tungsten electrodes

2% thoriated accept accustomed a lot of bad columnist for the radioactivity affair but they do work.

2% lanthanated electrodes are a in actuality acceptable all purpose electrode...good for TIG adjustment aluminum as able-bodied as steel.

Use the aboriginal electrode that will get the job done afterwards agitation at max amperage.

Remote amperage control...you allegation a basal pedal. Period.

Once all the settings are ok, and bold you are adjustment on 1/8" blubbery aluminum, grab a section of 4043 accompaniment rod in 3/32 bore (rarely will you use a rod as blubbery or thicker than the metal you are Blister Packaging Machine )]]> http://propertyinterest.com.au/forum/residential-investment-11/set-the-amperage-to-about-davison-machinery-rf-welder/post_26/ Mon, 20 Feb 2017 03:24:26 +0000 Aimee Smith