Build a frame
The next step is to straight cut the lumber to fit the measured opening. You will then have to build a frame around the block.
Attach the block channel to the frame
You will then have to mitre-cut the glass brick installation channels. Get short screws and attach each block channel to each side of the frame.
Blend the channel with the screws
The next step is to use your fingertip to dab paint on the screws and make them blend with the channel that surrounds it.
Attach the frame pieces
Get a frame and attach it vertically to the bottom frame piece. You can do this using the wood screws at the corner.
Install the blocks
When installing the glass bricks Perth, position them in the bottom channel and snug it to the side frame piece. Get the other bricks and install them as well. Make sure you have a spacer between each brick.
Attach vertical frame piece
Get the wood screws and use them to attach the other vertical side frame at the end. This should be tightly fixed against the blocks.
Attach the top of your frame
You can attach the top of your frame using wood screws.
Positioning the insert
Now you need to install the entire framed glass block into the wall. You have to start by positioning the insert and adjust the flush with the wall and then check for plumb and level. After installing the glassdirect, add shims as needed along the top and the bottom. https://www.directglass.com.au/
